| project | Specification |
| Number of axes | Maximum number of axes: 6 |
| Coordinate value and dimension | Workpiece coordinate system (G50), local coordinate system, workpiece coordinate system 1 - 6 (G54 - G59) |
| Coordinate plane selection G17, G18, G19 |
| Position command range: ± 99999999 × minimum input unit |
| Absolute / incremental programming, polar coordinate programming, inch / metric conversion, linear axis / rotary axis parameter setting |
| Preparatory Function | Multi-group G instruction, including fast positioning, linear interpolation, circular interpolation, thread cutting, polar coordinate interpolation, rigid tapping, flexible tapping, pause, tool compensation, macro program call, skip and fixed cycle |
| Feed Function | Fast moving speed: μ level (IS-B) 0 mm / min - 60000 mm / min 0.1 μ level (IS-C) 0 mm / min - 24000 mm / min |
| Fast ratio: F0, 25%, 50%, 100% in total of four real-time correction |
| Cutting feed rate: μ level (IS-B) 0 mm / min - 30000 mm / min 0.1 μ level (IS-C) 0 mm / min - 24000 mm / min |
| Feed ratio: 0~150% of a total of sixteen real-time correction |
| Fast moving / cutting feed acceleration and deceleration: front acceleration and deceleration linear type, front acceleration and deceleration S-type, back acceleration and deceleration linear type, back acceleration and deceleration index type. |
| Spindle Function | Spindle speed: It can be given by the S code or PLC signal, and the speed range is 0rpm - 9999rpm. |
| Spindle ratio: 50% - 120% of a total of 8 real-time correction |
| 0V - 10V analog voltage output, that supports flexible tapping / rigid tapping |
| The number of spindle encoder lines can be set. |
| Tool Function | Tool length compensation, radius / diameter compensation, wear compensation, tool life management |
| Tool setting mode: Fixed-point tool setting , trial cutting tool setting, back to the reference tool setting, coordinate recording function |
| Execution mode of tool offset : modify coordinates, tool movement |
| Support for turntable style tool magazine , circular tool magazine , Sunflower tool magazine |
| Auxiliary Function | Special M code (M00, M01, M02, M30, M98, M99), the remaining M code defined by the PLC |
| PLC Function | Two-level PLC program, maximum 5000 steps, refresh cycle of first level program is 8ms |
| PLC program online modification, real-time monitoring; support PLC warning and PLC alarm |
| Support multi-PLC program, the current running PLC program can be chosen. |
| NC600 Host：40 input/32 output |
| NC800 Host：48 input /48 output |
| Program Storage and Editing | Program capacity: 1GB, 10000 procedures (including subroutines, macros) |
| Edit function: program / program segment / word search, modify, delete, copy, paste |
| MDI program segment entry execution, support macro / subroutine call, allow multiple subroutine nesting, and support for graphics-assisted programming |
| Program Check Function | Track preview, graphic simulation, dry running, machine lock, auxiliary function lock, single segment run, manual pulse trail cut |
| Simplified Programming Function | Fixed cycle, rigid tapping, direct input as per drawing dimension, auto chamfering, statement macro programming |
| Offset Function | Reverse clearance compensation: 0 mm-2 mm (or 0 inch-0.2 inch), reverse clearance compensation mode and frequency are set by parameters. |
| Memory thread pitch error compensation, each axis compensation point is setting by parameter. |
| Human Machine Interface | 10-inch real color LCD that is supporting Chinese and English language display. |
| Processing track display, processing track real-time zoom out and zoom in |
| Position, program, cutter compensation, alerts, parameters, settings, graph,diagnosis, ladder diagram, file management |
| Communication Function | USB: USB disk file operation, USB disk file directly processing, support PLC program, system software upgraded by USB disk |
| LAN: MES network management, machining program, parameters and other documents two-way transmission, remote monitoring and control |
| NFC: user authorization management, it can achieve staff attendance with production piece management with MES. |
| Safety Function | Emergency stop, hardware range limit, software range inspection, data backup and recovery |
| Electrical Interface | 6 control axis (including servo axis), 2 analog voltage output, 2 encoder feedback input, 2 electronic hand wheel input, 1 LAN, 1 USB, 1 SD card slot, 48 input/48 output |
| Note | Due to technical upgrade and improvement, the product parameters are subject to change without notice. All ordered products and parameters are subject to the physical product. |