project | Specification |
Number of axes | Maximum number of axes: 3 |
Coordinate value and dimension | Workpiece coordinate system (G50), local coordinate system, workpiece coordinate system 1 - 6 (G54 - G59) |
Coordinate plane selection G17, G18, G19 |
Position command range: ± 9999.9999 |
Absolute / incremental programming, Diameter /Radius programming, inch / metric conversion, linear axis / rotary axis parameter setting |
Preparatory Function | Multi-group G instruction, including fast positioning, linear interpolation, circular interpolation, thread cutting, polar coordinate interpolation, rigid tapping, flexible tapping, pause, tool compensation, macro program call, skip and fixed cycle |
Feed Function | Fast moving speed: μ level (IS-B) 0 mm / min - 60000 mm / min 0.1 μ level (IS-C) 0 mm / min - 24000 mm / min |
Fast ratio: F0, 25%, 50%, 100% in total of four real-time correction |
Cutting feed rate: μ level (IS-B) 0 mm / min - 30000 mm / min 0.1 μ level (IS-C) 0 mm / min - 24000 mm / min |
Feed ratio: 0~150% of a total of sixteen real-time correction |
Fast moving / cutting feed acceleration and deceleration: front acceleration and deceleration linear type, front acceleration and deceleration S-type, back acceleration and deceleration linear type, back acceleration and deceleration index type. |
Thread cutting | Thread type: Constant pitch straight thread / Taper thread / End thread,Variable pitch straight thread / Taper thread / End thread |
umber of threads: 1~99 threads |
Thread pitch:0.01mm~500mm(Metric screw thread)or 0.06 pictch/inch~2540 pictch/inch(inch screw thread) |
Thread cutting acceleration and deceleration: linear, exponential optional |
Trailing end of thread:trailing length, pitch, movemen, speed configurable |
Spindle Function | Spindle speed: It can be given by the S code or PLC signal, and the speed range is 0rpm - 9999rpm. |
Spindle ratio: 50% - 120% of a total of 8 real-time correction |
0V - 10V analog voltage output, that supports flexible tapping / rigid tapping |
The number of spindle encoder lines can be set. |
Tool Function | Tool length compensation, radius / diameter compensation, wear compensation, tool life management |
Tool setting mode: Fixed-point tool setting , trial cutting tool setting, back to the reference tool setting, coordinate recording function |
Execution mode of tool offset : modify coordinates, tool movement |
Auxiliary Function | Special M code (M00, M01, M02, M30, M98, M99), the remaining M code defined by the PLC |
PLC Function | Two-level PLC program, maximum 5000 steps, refresh cycle of first level program is 8ms |
PLC program online modification, real-time monitoring; support PLC warning and PLC alarm |
Support multi-PLC program, the current running PLC program can be chosen. |
Basic I / O:32 input/24 output |
Extensible serial I / O unit (optional) |
| Program capacity: 1GB, 10000 procedures (including subroutines, macros) |
Program Storage and Editing | Edit function: program / program segment / word search, modify, delete, copy, paste |
| MDI program segment entry execution, support macro / subroutine call, allow multiple subroutine nesting, and support for graphics-assisted programming |
Program Check Function | Track preview, graphic simulation, dry running, machine lock, auxiliary function lock, single segment run, manual pulse trail cut |
Simplified Programming Function | Fixed cycle, rigid tapping, direct input as per drawing dimension, auto chamfering, statement macro programming |
Offset Function | Reverse clearance compensation: 0 mm-2 mm (or 0 inch-0.2 inch), reverse clearance compensation mode and frequency are set by parameters. |
Memory thread pitch error compensation, each axis compensation point is setting by parameter. |
Human Machine Interface | 7-inch real color LCD that is supporting Chinese and English language display. |
Processing track display, processing track real-time zoom out and zoom in |
Position, program, cutter compensation, alerts, parameters, settings, graph,diagnosis, ladder diagram, file management |
Communication Function | USB: USB disk file operation, USB disk file directly processing, support PLC program, system software upgraded by USB disk |
| LAN: MES network management, machining program, parameters and other documents two-way transmission, remote monitoring and control |
Safety Function | Emergency stop, hardware range limit, software range inspection, data backup and recovery |
Electrical Interface | 3 control axis (including servo axis), 1 analog voltage output, 1 encoder feedback input, 1 electronic hand wheel input, 1 LAN, 1 USB, 1 SD card slot, 32 input/24 output |
Note | Due to technical upgrade and improvement, the product parameters are subject to change without notice. All ordered products and parameters are subject to the physical product. |